ZYT15 1NO1NC ELECTRIC DIGITAL TIMER

ZYT15 DIGITAL TIMER 1. 16 ON & 16 OFF 2. 1 NO&1 NC 3. battery: rechargeable 4. CCC & CE certification

ZYT15 1NO1NC ELECTRIC DIGITAL TIMER

Function and Application

This product can automatically switch on and switch off the power supply of various kinds of electric equipment, according to customer’s fixed time. It is widely used in programmable control of electric cooker, booster, lamp, water heater, sprayer, bottler, preheater, agriculture facilities and broadcasting equipment etc.

Technical Specifications

Rated voltage: 220V/50Hz                 Voltage scope: 85%~110%

Capacitance Load: 16A                    Program: 16 ON / 16 OFF

Consumed power<5VA                   Timing error <±2s/day(25°C±1°C)

Timing Control Range:1min~168h         Installation: guide rail

Temperature:-10°C~+60°C               Relative Humidity: <95%

Dimension:36×86×65mm                 Weight:120g 

Operation instructions

First time use this timer switch, please input power supply and let battery recharge. 

1. Adjust Clock

l        Before using, please check the clock display to follow the current time, and calibrate it.

l        Hold down the "CLOCK" key, meanwhile adjust respectively the key “HOUR”, “MINUTE” and “DAY” in accord with the current time.

2. Time setting

step	key	Setting content
1	Press the key "P"	The first switch-on setting(display 1ON )
2	Press the key  "H+" and "M+"	Setting switch-on time (hour, minute)
3	Press the key “D+"	Working Mode: set the switch-on working days
4	Press the key "P" again	The first switch-off setting(display 1OFF)
5	Press the key "H+" and "M+" again	Setting switch-off time (hour, minute)
6	Press the key "“D+"" again	set the switch-off working days
7	Repeat step 1 to 6	Set other 2ON and 2OFF, 3ON and 3OFF until 16ON and16OFF(if no, pls make it display “— — : ­— —” )
8	Press the key " "	End the setting and enter to the state of clock display.
9	Press the key " MANUAL"	Adjust on-off sign to the current state "ON" or "OFF" and adjust to the position of "AUTO".

Notice:  When make an error or cancel the settings, press "C/R "key to make it display “— — : ­— —” ( it means no timing program, not "00:00").

 If you set the switch-on time, you must set the switch-off time to correspond.

3. For example

Some electrical equipment needs to switch on 19:00, and switch off 08:00 next day.

A. Follow the steps 1, 2, 3, and make it display as Figure 1a;

B. Follow the steps 4,5,6 and make it display as Figure 1b;

C. Follow the step 7, and make each group 2ON and 2OFF, 3ON and 3OFF until 16ON and 16OFF display as“— —:— —”.

D. Follow the steps 8, 9 and adjust the work mode to the state of "AUTO".

ZYT15 1NO1NC ELECTRIC DIGITAL TIMER